guidefast

Economical energy supply for crane girders and indoor cranes - quickly installed as a modular kit solution The guidefast guide trough is mounted on the side of the crane carriage. In case of installation on crane girders one can omit the welding of brackets. Installation times are kept very short, as the guide trough only needs to be mounted in the previously fixed brackets and then fixed with the clamping blocks. The small amount of various components and the fixed trough width also contribute to a simple installation. 1 Fast and simple fastening by means of clamping rails 2 Single-part steel trough with 2 m standard length 3 Abrasion-resistant: gliding bar for center-mounted feed 4 Guide trough segments are connected with clips, avoiding misalignment 5 Clever: 2 version retainer with integrated strain relief Reduce your installation time by up to 80% compared to conventional guide systems Fits virtually any standard crane girder 2 version retainer with integrated strain relief, for fixed routing of cables on the crane carriage ± 5mm vertical tolerance of the retainers For standard trough length of 2.0 m - with or without glide bar Can be used for any side mounted application - not limited to cranes Installation-friendly due to prefabricated bore patterns of the e-chain® mounting brackets Standard material: galvanized steel. Also available in stainless steel. Material grade 1.4301 or black powdercoat Long-term tested to withstand vibration and rough environment Width [mm]: E2/000 overview chainflex cables - product overview Economical energy supply for crane girders and indoor cranes - quickly installed as a modular kit solution The guidefast guide trough is mounted on the side of the crane carriage. In case of installation on crane girders one can omit the welding of brackets. Installation times are kept very short, as the guide trough only needs to be mounted in the previously fixed brackets and then fixed with the clamping blocks. The small amount of various components and the fixed trough width also contribute to a simple installation. 1 Fast and simple fastening by means of clamping rails 2 Single-part steel trough with 2 m standard length 3 Abrasion-resistant: gliding bar for center-mounted feed 4 Guide trough segments are connected with clips, avoiding misalignment 5 Clever: 2 version retainer with integrated strain relief Reduce your installation time by up to 80% compared to conventional guide systems Fits virtually any standard crane girder 2 version retainer with integrated strain relief, for fixed routing of cables on the crane carriage ± 5mm vertical tolerance of the retainers For standard trough length of 2.0 m - with or without glide bar Can be used for any side mounted application - not limited to cranes Installation-friendly due to prefabricated bore patterns of the e-chain® mounting brackets Standard material: galvanized steel. Also available in stainless steel. Material grade 1.4301 or black powdercoat Long-term tested to withstand vibration and rough environment Component retainer set A - Version 01 - short retainer B - Version 02 - long retainer C - Clamping blocks, Part No. G9.2.10 Ba = e-chain® outer width Bi = e-chain® inner width ha = e-chain® outer height BRi = Inner trough width = BRi ≥ Ba + 4 2 versions: Retainer with integrated strain relief: A - Version 01 - short retainer B - Version 02 - long retainer Guide troughs Standard length: 2000 mm Standard material: Galvanized steel Each element has one opening for cable feed Version with installed glide bars is also available Different part number according to size - please see details in the table below Width [mm]: Bracket short version Delivery including clamping block and screw Clamping block, incl. conductivity - available as per DIN EN 61537: Standard Few fastening options for permanently laid cables, therefore more space-saving than the long version Standard support interval: 1 bracket per meter Vertically and horizontally adjustable Bracket long version Delivery including clamping block and screw Clamping block, incl. conductivity - available as per DIN EN 61537: Standard Lots of extra fastening options for permanently laid cables Standard support interval: 1 bracket per meter Bracket with integrated strain reliefs for the installation of permanently laid cables on the crane girder. Connector Delivers an uninterrupted connection of two trough pieces Installed with a rubber mallet By ordering the guidefast trough >1000 mm a connector is included. Quickly mounted with a few hand movements - the guidefast guide trough. Installation through weld-on bolt or screw/thread directly on the crane girder.